Home page

RealMax® RMBS wound filter element

Category:

Filter series

Keywords:

SDI instrument series

Product Attachment:

Engineering Project:

Product Project:

Product Description

RealMax ^® The RMBS series wound filter element is specially designed for condensate systems without other protective devices, effectively removing iron oxides, copper, and other contaminants from the condensate. Resin pre-coating is possible before filtration, ensuring uniform filtration across the entire length and achieving 98% filtration efficiency.

Extra-long filter element 70inch/1778mm, stainless steel threaded center tube and connectors, continuous polypropylene fiber wound filter element, high mechanical strength, will not deform even under harsh process conditions. It can be directly installed in existing equipment without replacement or modification. Filter elements of different sizes and precisions can be provided for various pre-filtration applications.

Product Features

High dirt holding capacity over the entire length

Low operating resistance, strong adsorption

Simple system, no acid-base consumption and pollution from regeneration acid-base waste, easy waste disposal, beneficial to environmental protection

Low investment cost, small pressure loss before and after condensate fine treatment

Application Areas

Condensate fine treatment

High-throughput condensate

Power plant condensate system

Supercritical boiler

Mixed cycle condensation

Technical Parameters

Parameter Type	Parameter Value
Precision Grade (Absolute)	1, 2, 3, 4, 5, 10, 20μm
Outer Diameter	2.5inch
Inner Diameter	1.2inch
Length	60inch 70inch
Filter Material	Polypropylene
Support Frame	Stainless Steel
Bottom Interface	Threaded Connection
Top Interface	Threaded Connection
Maximum Temperature	180ºF / 82ºC
Recommended Flow Rate	3.5~4.5m3/h
Recommended Replacement Differential Pressure	21psid@68°F/1.5bard@20°C
Maximum Operating Differential Pressure	35psid@68ºF / 2.45bard@20ºC

Model Selection Instructions

Code	Description	Parameters
RMBS	Filter Element
P	Filter Material	P = Polypropylene
050	Filtration Accuracy	010 = 1μm 020 = 2μm 030 = 3μm 040 = 4μm 050 = 5μm 100 = 10μm 200 = 20μm
70	Filter Element Length	60 = 60inch 70 = 70inch
M	Bottom Interface	E = EPDM N = Nitrile Rubber S = Silicone Rubber V = Viton
0	Top Interface	0 = M10 8 = M8
S	Support Frame Material	S = SS304 L = SS316