Home page

RealMax®RMAP folding filter element

Category:

Filter series

Keywords:

SDI instrument series

Product Attachment:

Engineering Project:

Product Project:

Product Description

RealMax ^® RMAP series pleated filter cartridges are made of multiple layers of filter media, effectively increasing the filter area inside the cartridge. The cartridge housing, support frame, and end caps are made of polypropylene. Each seal uses hot melt technology, contains no adhesives, has good sealing performance, no leakage, and no pollution.

The unique structure provides high dirt-holding capacity, making deep filtration more excellent, reliable performance, and widely used in various fields.

Product Features

Larger filter area, providing greater flow rate and longer service life
Lower initial pressure drop, effectively reducing system energy consumption
Higher dirt holding capacity, ensuring the service life of the filter cartridge
Absolute accuracy guarantees filtration effect
Stable pore structure effectively blocks ultimate particles
All polypropylene material and structure meet a wide range of application requirements
Polypropylene meets FDA standards
Excellent chemical compatibility, high temperature resistance, good strength, and corrosion resistance
High flow rate reduces the number of filter cartridges and lowers costs
Long life reduces replacement frequency
Safe, environmentally friendly, and easy to dispose of
Fiber shedding, 100% integrity test

Application Areas

Food and Beverage
Magnetic Media
Electronics
Chemicals
Ink
Pharmaceuticals
Imaging Solutions

Technical Parameters

Parameter Type	Parameter Value
Accuracy Level ( Absolute )	0.1, 0.22, 0.45, 1, 2, 3, 5 , 10, 30, 6 0μm
Outer Diameter	2.5inch
Inner Diameter	1.2 inch
Length	10, 20, 30, 40, 50 inch
Maximum Temperature	180ºF / 82ºC
Recommended Flow Rate	0.5m3 / h / 10inch
Recommended Replacement Differential Pressure	30psid@77ºF / 2.1bard@25ºC
Maximum Differential Pressure	60psid@77ºF / 4.2bard@25ºC

Filtration Characteristics

Code	Description	Parameter
RM A P	Filter Cartridge
P	Filter Media Material	P = Polypropylene
050	Filtration Accuracy	001 = 0.1μm，002 = 0.2μm 0045 = 0.45μm，010 = 1μm 020 = 2μm，030 = 3μm 050 = 5μm，100 = 10μm 300 = 30μm，600 = 60μm
40	Filter Cartridge Length	10 = 10inch 20 = 20inch 30 = 30inch 40 = 40inch 50 = 50inch
1	End Cap Type	1 = Flat, 2 = Finned
1	Interface Type	1 = Flat, 2 = 222, 6 = 226
E	Seal Material	V = Fluororubber S = Silicone Rubber E = EPDM N = Nitrile Rubber
P	Support Frame Material	P = Polypropylene